Dynacore Equipment manufactures the most advanced hollowcore extruders in the industry, designed to keep maintenance and production costs down to a minimum and production capacity at its maximum.
Hollowcore Extruder
Dynacore Extruders are manufactured in the following standard sizes:
- 150mm (6”)
- 200mm (8”)
- 250mm (10”)
- 300mm (12”)
- 350mm (14”)
- 400mm (16”)
Machines to produce other sizes or non-standard cross sections can be custom manufactured to suit the client's needs.
Microprocessor controls for the extruder drive and vibrator motors allow the operator to fine tune the Dynacore extruder to suit local materials and operating conditions. The extruder can be adjusted to ensure optimum concrete compaction for a wide range of mix parameters.
Inherent to Dynacore extruders is modular engineering design. A single interchangeable power module can be shared between extruder modules of different section sizes.
Specifications
| Handling weight: | 3860kg (8500 lbs.) |
| Length: | 3.0m (121 in.) |
| Width: | 1.5m (60 in.) |
| Height: | 1.7m (67 in.) |
| Main motors: | 2, 11 or 15 kW (15 or 20 hp) |
| Main gearboxes: | 2, 30:1 ratio |
| Hopper capacity: | 1.5 cu.m (2.0 cu.yds) |
| Extrusion speed: | 1.3 to 2.1m/min (50 to 86 in./min)* |
| Concrete consumption: | 2.7 to 4.1 mins/cu.m (2.0 to 3.2 mins/cu.yd)* |
| Electrical ratings: | 600 volts, 3-phase, 60 Hz |
| 440 volts, 3-phase, 60 Hz | |
| 380 volts, 3-phase, 50 Hz | |
| Power requirement: | 100 amps |
| Electrical cable: | In compliance with local regulations |
* Actual speed and concrete consumption is dependent upon extruder response to materials used. These specifications are subject to change without notice.